Modcrete AAC Blox PLUS
Thermal Insulation
While the thermal conductivity of normal AAC Block is 0.24 W/m K, ModCrete AAC PLUS a very low thermal conductivity of 0.07 W/m K, which provide approximately 3 times better heat insulation than AAC blocks.
Light Weight
AAC blocks have a density range of 451 kg/cum to 750 kg/cum. This results in total cost savings as well as a faster construction period.
High Strength
High pressure steam curing autoclaving process gives AAC unmatched strength to weight ratio, which far exceeds the Indian Building code requirements
Sound Proof
AAC walls have an excellent sound transmission class (STC) rating of 44. Which results to virtually soundproof interiors, which in turn provides Excellent Acoustic Performance.
Cost Effective
Being lightweight, AAC drastically reduces the dead weight of building, resulting into reduction in steel (up to 20%) and cement (up to 25%) structural cost saving. Lighter product reduces transport costs as well being 15 times the size of a clay brick, AAC wall construction involves 1/15 of joints, thus an overall mortar saving up to 66%
Fire Resistant
Best in class fire rating of 4 hours. The melting point of AAC is over 1600 celcius. more than twice the typical temperature in a building fire of 650 celcius.
Accurate Dimension
Its automatic manufacturing process gives AAC an exceptional dimensional accuracy & smooth surface, eliminating need of three-coat plaster walls and allowing for a final 6mm skim coat (putty/pop). Our AAC provides greater Design Versatility & Flexibility.
Superior Durability
AAC blocks are highly durable and can bear adverse weather conditions. Furthermore, they are earthquake resistant. Being ultra-light weight helps AAC be long lasting. Regions of high seismic activity like Japan exclusively use AAC. As it has proven to withstand wind loads of category 5 tropical storms.
Workability
AAC blocks can be sawed, drilled, just like wood and hence they prove to be one of the most easy to use construction materials’. It facilitates easier fitting of plumbing, electrical and also wall
fittings.
Eco Friendly
AAC is 100% Green Building Material & is a walling material of choice in LEED certified buildings. AAC is most energy & resource efficient in the sense that it uses least amount of energy & material per m3 of product. Unlike brick manufacturing process which uses previous top-layer agricultural soil, AAC uses FlyAsh (65% of its weight).
Termite & Insect Resistant
Solid wall construction and finishes which bond to the wall have no cavities for insects, termites or rodents to dwell in. This also eliminates entry points. Termites and ants do not eat or nest in AAC. Cannot be penetrated by termites or insects. Reduces need for pest control. Offers maximum protection against damage.
Faster Construction
AAC Blocks helps reduce the construction time by upto 20%. Different sizes of blocks help reduce the number of joints in wall masonry. Easy to install. It sets and hardens very quickly. Lighter blocks make construction easier and faster
ModCrete AAC Blox PLUS
ModCrete AAC Blox PLUS is a very high heat barrier. It provides almost 10 times better than red bricks and 3 times better than ModCrete AAC Blox in thermal insulation. While the thermal conductivity of normal AAC Block is 0.24 W/m K, ModCrete AAC PLUS a very low thermal conductivity of 0.07 W/m K, which provide approximately 3 times better heat insulation than AAC blocks. The product has been tested independently by National Testing Laboratory Pvt. Ltd., and the results are as under:
Sizes
The size of AAC blocks are as under :-
| Length | 600 mm (23.6 in) & 625 mm (24.6in) |
| Height | 200 mm (8 in), 240 mm (9.5 in) & 250 mm (10 in) |
| Width | 100, 115, 125, 150, 200, 225, 250, 300mm (4, 41⁄2, 5, 6, 8, 9 10, 12 in) |
Get Requirement Estimate
Technical
Specifications
| Parameter | Specification |
| Thermal Conductivity | 0.07 w/m^(0)K |
| Density Oven Dry | 550-650 kg/m3 |
| Compressive strength | 4N/mm2 (MPa) |
| Shear Strength | 0.6 N/m2 |
| Modulus of Elasticity | 2040 Mpa |
| Coefficient of Thermal Expansion | 8.1 x 10^(-6)*K^(-1) |
| Water Absorption | 8% |
| Drying Shrinkage | 0.04% |
| Fire resistance | 4 Hrs (for 200 mm wall) |
| Sound Transmission class rating | 44db for 200 mm wall |
We've Been here for over 20 years
We have an experience of more than 20 years in the fly ash industry, and are dedicated to be the driving force of change in the construction material market to make it more inclusive for the nature.